


RUPES Parts
RUPES Zinc Socket Cap Screw with Washer
RUPES Zinc Socket Cap Screw with Washer
SNS Auto Supply
750 11th Ave NE
West Fargo ND 58078
United States
Made in Italy
Choose options
Made in Italy
Made in Italy
LHR75 Backing Plate Screw, RUPES 9.820
The LHR75 backing plate screw, RUPES part 9.820, is an M6 x 16 mm socket cap screw, zinc plated, with a captive washer, and it clamps the RUPES 3" backing plate (990.007) to RUPES's 12 mm mini polishers. RUPES's parts diagram shows it at the center of the plate on the RUPES LHR75E, and the same M6 mount holds the plate on the air-powered LHR75 and battery HLR75 iBrid Mini. It takes the hex key RUPES supplies with those tools. One screw holds the whole plate, so a rounded hex socket or a lost screw parks the polisher until it is replaced.
The BigFoot 5- and 6-inch polishers use a bigger screw. The LHR21ES, LHR15ES, Mark III BigFoots, and Skorpio III air sander all use the M8 RUPES 9.715 socket cap screw, which will not thread into a mini polisher's M6 drive. Match the screw to the plate size: 3-inch plates take the 9.820, and 5- and 6-inch BigFoot plates take the 9.715.
What Makes it Great:
🔩 M6 Thread for the Minis: Sized to the M6 backing pad thread RUPES specifies for its 75 mm mini polishers, so it seats fully without forcing.
🧷 Captive Washer: The washer stays on the screw, so it can't drop onto the shop floor during a plate swap.
🛡️ Zinc Plating: The plated finish resists the moisture and compound residue that build up in the middle of a polishing plate.
🔁 One Spare, Three Machines: The LHR75E, LHR75, and HLR75 share the same 3-inch plate and screw, so a shop running several minis keeps one part on hand.
Frequently Asked Questions
Which screw does the RUPES LHR75E backing plate use?
The 9.820: one M6 socket cap screw with its washer, threaded through the middle of the 990.007 plate. RUPES's LHR75E parts diagram lists it with the 9.1395 hex key.
Is the RUPES 9.820 the same as the 9.715 screw?
No. The 9.820 is an M6 screw for the 3-inch mini polishers, and the 9.715 is an M8 screw for the 5- and 6-inch BigFoots and the Skorpio sander. They will not swap.
Can I use a hardware store M6 bolt on my RUPES mini polisher?
RUPES's manuals call for original RUPES parts, and the 9.820 comes with the washer and length RUPES designed for the plate. A bolt that is too long can bottom out in the drive, and one too short holds fewer threads.
Specifications:
Installation (Best Practices):


Businesses Save Money
FREE UPGRADE
If you own a business or LLC you can sign-up for a free business account below! Get access to better pricing, exclusive products, bulk discounts, and more!
Trainings - Tutorials - & More!
SNS on Youtube
Check out our Youtube for product demos, detailing tips, training, and so much more. Throw us a subscribe if you find value in the content!


The Search for the latest & greatest...
SNS Auto Supply
SNS has active owners in the detailing industry that take the time to travel across the country to SEMA, MTE Expo, and more dealer shows in hopes to constantly improve the products that we carry for detailers!
Starting Small
The Business
SNS Auto Supply got its start in early 2021. The owners of SNS always make an effort to keep the shelves stocked for our loyal customers so they rarely have to worry about running out of product.
