Made for Marine Gelcoats

Nasiol MarineCoat One is a nano ceramic coating designed specifically for the gelcoats of marine vehicles and plastic parts. Offering exceptional protection and ease of maintenance, this coating ensures your boat, pontoon, jet-ski, etc. remains in top condition through various challenging environments. Durability of up to 1 season of protection for underwater parts and up to 2 seasons for above-water components.

Features:

🔧 Comprehensive Protection: Shields against scratches, acid rain, UV degradation, detergents, and chemicals. Keep your marine vehicle looking pristine and protected from environmental damage.

💧 Ease of Cleaning: Removing exhaust stains and other contaminants from surfaces coated with MarineCoat One is significantly easier. No need for harsh chemicals – simple maintenance will suffice.

☀️ Durability: Offers up to 1 season of protection for underwater parts and up to 2 seasons for above-water components. Enjoy long-lasting defense against the elements.

Directions:

1. Ensure the application area's temperature and humidity are between +5°C and +30°C (41°F and 86°F) and 50% relative humidity for optimal product performance. Avoid higher temperatures or humidity levels, as they can cause the product to cure faster than expected. Do not apply in direct sunlight and only work on cool surfaces.
2. Thoroughly clean your vehicle. Use a clay bar if necessary for removing embedded surface contaminants.
3. Depending on your marine vehicle's surface condition, use appropriate polishing or compounding tools and silicone/wax-free compounds to remove imperfections and prepare the surface for the nano coating.
4. After polishing use a surface prep to clean the marine vehicle of any residue or oils.
5.  Pour the necessary amount of product onto the suede cloth. Spread the product gently over the surface in a cross-hatching motion.
6. Once beading occurs gently wipe the excess product off from the surface using the light gray Nasiol microfiber cloth in linear motions. To make the most of microfiber cloths, fold each one four times before.
7. After wiping the surface with the light gray microfiber cloth, complete the final buffing process by gently using the dark gray Nasiol microfiber cloth in circular motions.
8. Keep the coated surfaces away from direct sunlight, the elements, various types of contamination, and water exposure for 24 hours. Please wait 48 hours for the nano coating to cure and become resistant to abrasion and chemicals, before any detergent-based washing.

NOTE: If the product begins to cure on the surface before wiping, it may be necessary to remove it by polishing or sanding and then reapply correctly.

Download the SDS