Unmatched Cutting and Finishing Power

Prepare to redefine your approach to detailing with 3D One from 3D Car Care, a compound and polish that stands in a league of its own. Offering a groundbreaking formula, 3D One effortlessly combines the cutting power of a compound with the fine finishing touch of a polish. Get ready to experience detailing like never before with the exceptional features that set 3D One apart from the competition.

Features:

🚗 Versatile Cutting Options: Adapt 3D One to your specific detailing needs by changing the pad or tool. Achieve super-aggressive cut with a rotary polisher and a traditional 4-ply, twisted wool cutting pad, or opt for less cut with an orbital polisher using a fiber pad or foam cutting pad. For polishing and show car finishing, switch to a favorite orbital polisher with a soft foam polishing or finishing pad.

🔄 Forever Buffing Cycle: Say goodbye to the frustration of drying compounds or polishes. Experience the unique forever buffing cycle of 3D One, where the product stays wet on the surface as long as you keep buffing. Enjoy continuous cutting or polishing without interruptions.

🧼 Smooth and Fluid Wipe-Off: The wipe-off process is a breeze with 3D One. The product lubricates the surface as you wipe, ensuring a smooth and fluid wipe-off. No more worries about dusty residues or towel marring during the cleanup.

🌟 Unmatched Performance: Unlike any other compound or polish, 3D One delivers unparalleled performance, leaving surfaces with a flawless finish. Say goodbye to common issues like dusting and difficult wipe-off, and embrace a detailing product that exceeds expectations.

Directions

1. Wear safety glasses. SHAKE CONTAINER BEFORE USING. Make sure surface is cool and clean.
2. Using a medium cutting pad add a generous amount of 3D One and work at a very slow speed in one area for twenty seconds to ensure pad is lubricated and broke-in.
3. Once that is done if necessary add a small amount of product and turn the buffer to between 3 and 5 working at a medium controlled pace with moderate to light pressure in an overlapping side to side and up and down pattern, make four passes.
4. If product starts to dry out while buffing simply just add a small amount of product to the pad and continue working in small areas.
5. Surface should then be wiped with an edgeless microfiber cloth.
6. Clean pad frequently with compressed air or a pad spur to ensure consistent results.

Download the SDS