Stinger Chemical Rayon Glass Polishing Pads

Rayon Pads Built for Automotive Glass

Stinger Chemical Rayon Glass Polishing Pads are purpose-built glass polishing pads, and that distinction matters more than most people expect. Automotive glass is significantly harder than vehicle paint, so the foam pads on your cart do not have the bite or the heat tolerance to correct it. Rayon does. These pads power through stubborn water spots, mineral deposits, and marks that survive every chemical you throw at them, restoring clarity to windshields and side glass. They come in 3 inch (75mm) and 5 inch (125mm), each sold in a 3-pack, with hook and loop backing that mounts to a standard backing plate. As a top Stinger Chemical distributor, SNS Auto Supply stocks both sizes.

Speed and lubrication are what separate a clear result from an expensive mistake. Run a rotary between 1,000 and 1,500 RPM, or a dual action between 3,000 and 4,500 OPM. Keep the glass wet the entire time. Glass builds heat fast under a pad, and overheating can distort or even crack the panel, so lubrication is not optional here the way it sometimes is on paint. Pair the pad with a dedicated glass polish rather than a paint compound; Stinger 821 Glass Clarifier and Water Spot Remover is built for exactly this job. See the rest of our glass cleaning range.

What Makes it Great:

🪟 Rayon Construction for Glass: Rayon has the cutting ability and heat tolerance that automotive glass demands, which foam paint pads simply do not provide.

💧 Cuts Stubborn Water Spots: Removes mineral deposits, etched water spots, and marks that chemical cleaners alone leave behind.

⚙️ Rotary and DA Compatible: Rated for 1,000 to 1,500 RPM on a rotary or 3,000 to 4,500 OPM on a dual action, so it fits whichever machine you already run.

🔄 Two Sizes, Sold in 3-Packs: 3 inch (75mm) for tight areas and edges, 5 inch (125mm) for windshields and larger glass, both with hook and loop backing.

Frequently Asked Questions

Why do you need a special pad for glass?

Automotive glass is significantly harder than paint. Foam pads designed for clear coat do not have the cutting ability or heat tolerance to correct glass, so you need a rayon pad paired with a dedicated glass polish.

What speed should I run?

On a rotary, 1,000 to 1,500 RPM. On a dual action, 3,000 to 4,500 OPM. Staying in those ranges keeps the cut effective without generating excessive heat.

Do I really need to keep the glass wet?

Yes, always. Glass builds heat quickly under a spinning pad, and overheating can distort or crack the panel. Keep the surface wet throughout the entire process, and stop to re-wet rather than working a drying section.

What polish should I use with them?

A dedicated glass polish, not a paint compound. Stinger 821 Glass Clarifier and Water Spot Remover is formulated for glass and pairs directly with these pads.

What sizes are available and how many come in a pack?

3 inch (75mm) and 5 inch (125mm), and each size is sold as a 3-pack.

Information:

Size(s): 3" or 5" Pads.
Content(s): 3-Pack.

Speed Recommendations:

Use Recommendations: