CCT: 2500K to 6500 K (Kelvin)
Beam Angle: 80°
Operating Time: 2-10 Hours
Charging Time: 4 Hours
Charger: USB Cable (Included)
Charger Plug Included: No.
Bluetooth Accessible: No.

• Press the on/off button to turn the lamp on in the sequence: Main > Spot > Off.
• Press and hold the on/off button while the main light is on to start dimming. Release, press, and
  hold again to increase.
• At the lowest and highest levels, the light will flash until the button is released.
• When the lamp is turned off the lamp will remember the setting of the main light.
• When the light is on, press the CCT SCAN button to change the color temperature manually.
• When the light is on, press and hold the CCT SCAN button for 2 seconds to activate the CCT SCAN
  mode.
• When in CCT SCAN mode, press the CCT SCAN button to pause the CCT SCAN mode.
• When in CCT SCAN mode, press and hold the CCT SCAN button for 2 seconds to deactivate
  CCT SCAN mode.
• When in CCT Scan mode, the CCT indicator corresponds to the following color
  temperature ranges: 25: 2500-3300K, 35: 3301-4100K, 45: 4101-4900K, 55: 4901-5700K, 65:
  5701-6500K.
• To save battery and avoid the risk of overheating an intelligent built-in system turn the lamp to low
  mode (250 lumen) after 3 minutes of use at high mode (500 lumen).

• Product Flyer
• Owner's Manual