

FLEX parts
FLEX XC3401 Backing Plate
FLEX XC3401 Backing Plate
SNS Auto Supply
750 11th Ave NE
West Fargo ND 58078
United States
Made in Germany
Choose options
Made in Germany
Made in Germany
FLEX XC3401 Backing Plate, 5.5-Inch Genuine Replacement
The FLEX XC3401 backing plate (FLEX part 342.637) is the factory 5.5-inch hook-and-loop plate for the XC 3401 VRG, FLEX's earlier forced-rotation polisher. It isn't a generic threaded plate: the back carries a molded gear ring that runs against the toothed ring inside the polisher's gear head, and that pairing is what drives the pad around instead of letting it free-spin like a standard dual action. The hub is keyed to the output shaft and held by a single screw and washer, so the plate seats one way only. FLEX rates the XC 3401 VRG's tool holder at 140 mm and its largest pad at 160 mm, which makes 6-inch foam and wool pads the working size.
SNS no longer stocks the XC 3401 itself, but the parts that wear out are still here. The hook face wears down with every pad change, and the motor runs on cut-off FLEX carbon brushes that shut the polisher off at their wear limit. Both are in the XC3401 parts collection. If your FLEX is one of the newer XCE polishers, this is the wrong plate: the XCE 10-8 125 and XCE 8-18.0 125 take the XCE 6" backing plate or its 5-inch version.
What Makes it Great:
⚙️ Gear-Ring Drive: The molded gear on the back of the plate is part of the XC 3401's drivetrain, giving 160 to 480 RPM of forced rotation on top of an 8 mm stroke at 3,200 to 9,600 orbits per minute.
🔑 Keyed Hub, One Screw: A groove in the hub meshes with the key surface on the output shaft, and one Allen screw holds it, so the plate seats the same way every time.
📏 140 mm Hook Face: Sized for pads up to 160 mm, the 6-inch cutting and finishing pads most XC 3401 owners already run.
✅ Genuine FLEX Part: FLEX's manual calls for original replacement parts only and says non-original parts void the manufacturer's guarantee.
Frequently Asked Questions
How do you change the backing plate on a FLEX XC3401?
Unplug the polisher, pull off the pad, and set the machine on its back. Hold the spindle lock, remove the center screw with the Allen key, and lift the old plate off. Clean the key surface on the shaft, line the new plate's groove up with it, refit the screw, and tighten while holding the spindle lock. Run it for a few seconds and check for vibration.
What size pads fit the XC3401 backing plate?
FLEX lists 160 mm, about 6.3 inches, as the largest tool for the XC 3401 VRG. A 6-inch pad on this 5.5-inch plate is the standard fit.
Does the XC3401 backing plate fit the FLEX XCE polishers?
No. This plate is listed for the XC 3401 VRG only. The XCE 10-8 125 and XCE 8-18.0 125 take the XCE 5" or XCE 6" backing plate.
Can I put a universal backing plate on an XC3401?
No. A universal plate has no gear ring and no keyed hub, so it can't mount or drive on the XC 3401. Only the FLEX plate fits.
Specifications:
Installation (Best Practices):


Businesses Save Money
FREE UPGRADE
If you own a business or LLC you can sign-up for a free business account below! Get access to better pricing, exclusive products, bulk discounts, and more!
Trainings - Tutorials - & More!
SNS on Youtube
Check out our Youtube for product demos, detailing tips, training, and so much more. Throw us a subscribe if you find value in the content!


The Search for the latest & greatest...
SNS Auto Supply
SNS has active owners in the detailing industry that take the time to travel across the country to SEMA, MTE Expo, and more dealer shows in hopes to constantly improve the products that we carry for detailers!
Starting Small
The Business
SNS Auto Supply got its start in early 2021. The owners of SNS always make an effort to keep the shelves stocked for our loyal customers so they rarely have to worry about running out of product.
