Air Tool Light for Interior Blowouts

Interior blowout is a visibility problem more than an air problem. Overhead shop lighting does not reach into a seat track, down a vent louver, or into the seam where the bolster meets the base, and when you lean in to work those areas your own body blocks whatever light you had. So you end up blowing at places you cannot actually see. This light clamps to the air tool itself, which means the illumination points wherever the nozzle points, and it moves with the tool rather than staying behind you.

That changes the work rather than just making it brighter. Being able to see into a crevice is what lets you direct debris out of the vehicle instead of relocating it somewhere else in the cabin, which is what happens when you blow blind. Dust, pet hair, sand in seat rails, and the crumbs packed into console seams all show up under direct light at the point of work. It is USB-C rechargeable with multiple brightness levels, so there are no batteries to stock, and it pairs with the Ultra Air Blaster and other blowout tools. See the rest of our detail lights.

What Makes it Great:

🔦 Light Follows the Nozzle: Mounted to the tool, so the beam goes exactly where the air goes. No reaching one direction while your light points another.

🪑 Reaches What Shop Lights Cannot: Seat tracks, vent louvers, console seams, and under-seat areas that overhead lighting never illuminates and your own shadow makes worse.

🔌 USB-C Rechargeable: Charges from the same cable as everything else on the bench, with multiple brightness levels and no disposable batteries to keep in stock.

🧰 Quick-Mount, Quick-Off: Clamps on and comes off without tools, so it stays on the blow gun for interiors and out of the way for everything else.

Frequently Asked Questions

Which air tools does it fit?

[CONFIRM AND LIST BEFORE PUBLISHING. Fit is determined by the clamp's jaw range against the diameter and profile of your tool's barrel or body, not by brand. State the mount's capacity and name the specific tools verified to work. This is the question that decides whether someone orders.]

Why not just use a headlamp or a drop light?

Different jobs. A headlamp follows your head, which works well when you are looking directly at what you are doing. The problem with interior blowout is that you are often reaching into a space your head cannot follow, under a seat or around a console, so the light ends up pointing at the back of your own hand. A drop light has the same issue from a fixed position. A tool-mounted light tracks the nozzle regardless of where your body ends up, which is the one place the beam actually needs to be.

How does better light change a blowout?

It changes where the debris ends up. Blowing blind into a crevice moves whatever is in there somewhere, and without seeing it you have no control over whether that somewhere is out the door or deeper into the next seam. Working with direct light on the area lets you angle the nozzle to push debris toward an exit rather than further in, which is the difference between removing dirt and relocating it. It also shows you when an area is actually clear instead of guessing.

How does it charge and how long does it run?

USB-C, using the included cable, so it charges from a wall adapter, a bench charger, or a laptop. Multiple brightness levels let you trade output for runtime, and running it below maximum extends a charge considerably on any LED light. [ADD CONFIRMED RUNTIME AND CHARGE TIME.]

Does it get in the way in tight spots?

It adds some bulk to the tool, and where you position the clamp matters. Mount it so the body sits along the tool rather than projecting out, and it stays clear of most work. In the genuinely tight spots, under a power seat or behind a pedal cluster, you may be better off taking it off for that one pass. The quick-mount is there for exactly that reason.

What's Included:

1 - Air Tool Detailing Light
1 - Air Tool Quick-Mount Attachment Assembly
1 - USB-C Charging Cable