High-Gloss Montan Wax!

3D Poxy falls into the category waxes called, show car waxes or finishing waxes. The reason for this is because it’s pure protection. There are not chemical cleaners or abrasives like you find in AIO type products. This is a dedicated product for protecting the paint will adding a deep, wet, high gloss shine that slick and slippery to the touch like we all love. Because it has no cleaners or abrasives and thus no ability to remove paint defects like swirls, scratches, oxidation, and water spots, it should ONLY be used on pant that is already in new or excellent condition. This includes brand new cars fresh off the dealership’s showroom floor or immediately after the paint on any vehicles has been professionally cleaned and polished.

What is it? - 3D Poxy is a non-cleaning, hybrid sealant/wax. This means it’s’ a blended paint protection product made from both man-made synthetic protection ingredients fused with naturally occurring fossilized Montan Wax. It contains zero abrasives or chemical cleaners and for this reason should only be used on paint that is clean and smooth to the touch like brand new vehicles or paint that has been recently corrected.

Montan Wax is a naturally occurring bituminous wax found in brown or lignite coal deposits. It is hard, non-toxic, and highly resistant to decomposition. In simpler terms, it doesn’t break-down as easy as other wax ingredient options commonly used in the car care industry. When used as an ingredient in automotive waxes it imparts a scuff-resistance, high water repellency and a super high gloss shine. 

Because Montan Wax both impermeable and also proven to be highly chemical resistant, it excels as just one of the protection ingredients used in 3D POXY to protect your car’s paint. Another favorable characteristic is that Montan Wax offers excellent heat-resistance, making it a great choice for use in outdoor environments where your vehicle is exposed to direct sunlight over extended periods of time.

Directions

1. Wear safety glasses. SHAKE CONTAINER BEFORE USING. Make sure surface is cool and clean.
2. Using a medium cutting pad add 4 to 5 dime sized drops of 3D® Poxy and work at a very slow speed in one 2' x 2' area at a time.
3. Once that is done if necessary add a small amount of product and turn the buffer to between 3 and 5 working at a medium controlled pace with moderate to light pressure in an overlapping side to side and up and down pattern, make four passes.
4. If product starts to dry out while buffing simply just add a small amount of product to the pad and continue working in small areas.
5. Surface should then be wiped with an edgeless microfiber cloth.
6. Clean pad frequently with compressed air or a pad spur to ensure consistent results.

Download the SDS