3" Buffing Starter Kit

3-Inch Spot Repair Buffing Kit

The Buff & Shine 3-inch buffing starter kit is a complete spot-repair buffing kit for small areas, tight panels, and precision correction where a full-size pad will not fit. It steps through the whole process with a compounding wool pad, a yellow polishing foam, and a black finishing foam, so you can cut, polish, and finish a defect without swapping setups. A 3-inch grip backing plate and a drill chuck adapter are included, so it runs on a drill, and the 5/8 by 11 thread also fits a rotary or pneumatic polisher. It is a handy kit for professional detailers, body shops, and enthusiasts tackling spot work. Browse the rest of our buffing pads to expand your setup.

Pair the wool pad with a cutting compound for compounding, then move to the yellow foam with a polish and finish with the black foam. Each pad has its own suggested speed range, so match your machine to the step for clean, controlled results on small areas.

Features:

🎯 Built for Spot Repair: 3-inch pads reach tight panels, edges, and small defects where a full-size pad cannot.

🔄 Cut, Polish, and Finish: Includes a compounding wool pad, a yellow polishing foam, and a black finishing foam to cover every step.

🔧 Drill or Polisher Ready: A 3-inch grip backing plate plus a drill chuck adapter and 5/8 by 11 thread fit a drill, rotary, or pneumatic polisher.

🌡️ Per-Pad Speed Ranges: Each pad lists a suggested RPM so you can dial in the right speed for compounding, polishing, or finishing.

Frequently Asked Questions

What is in the 3-inch buffing kit?

A 3-inch compounding wool pad, a 3-inch yellow polishing foam, a 3-inch black finishing foam, a 3-inch grip backing plate, and a drill chuck adapter.

What is the kit used for?

Spot-repair buffing on small areas and tight panels. It covers all paint correction steps, from cutting to polishing to finishing.

Can you use it on a drill?

Yes. The included drill chuck adapter lets it run on a drill, and the 5/8 by 11 thread also fits a rotary or pneumatic polisher.

What speed should I run each pad at?

Buff & Shine suggests roughly 1750 to 2200 RPM for the wool, 1120 to 1750 for the yellow foam, and 1200 to 1500 for the black foam. The backing plate is rated to 3000 RPM max.

What size are the pads?

All pads are 3 inches, with a 1/2-inch pile on the wool and 1-inch thick foam pads.

Information:

Size(s): 3" Pads. 5/8"-11 Threads.
Content(s): 1 Kit.

Speed Recommendations:

Use Recommendations: