7" Rotary Black Waffle Foam Polishing Pad

Waffle Foam Polishing Pad for Finishing

The Buff & Shine 7-inch black waffle foam polishing pad is a soft finishing pad whose waffle face is built to run cool and spread finishing polish or glaze evenly across the paint. Black is the soft grade in the Buff & Shine foam line, so it refines the surface with minimal cut as a final-step pad after compounding and correction. The open waffle pattern pulls air through the foam to hold heat down at the 800-1200 RPM range it is built for, which protects soft clears and keeps the finish consistent. It is a dependable finishing pad for professional detailers, dealership detail departments, and enthusiasts on a rotary. Browse the full range of waffle pads to match each step of your process.

Mount it on a hook-and-loop backing plate sized to your machine, load it with a finishing polish, and run it on your rotary polisher at 800-1200 RPM for the last refinement pass. The 1-inch pile gives enough cushion to follow body lines without starving the foam of airflow.

Features:

🧇 Waffle Foam Face: The open waffle pattern channels air through the pad, spreading polish evenly and keeping contact consistent across the panel.

🌡️ Runs Cooler: The airflow design pulls heat away during buffing, which protects soft paint and holds a steady finish through longer sets.

🚗 Soft Finishing Grade: Black foam applies finishing polishes and glazes with minimal cut for a clean, high-gloss result on soft clears.

🔄 Secure Hook-and-Loop Backing: Locks onto a matching backing plate and stays centered for stable rotary buffing at 800-1200 RPM.

Frequently Asked Questions

What is a waffle foam pad used for?

It applies finishing polishes and glazes. The waffle face improves airflow and product spread, and the soft black foam refines paint with minimal cut for a high-gloss finish.

What RPM should I run this pad at?

Buff & Shine recommends 800-1200 RPM on a rotary for this pad.

Is the black waffle pad for cutting or finishing?

Finishing. Black is the soft grade in the line. For cutting or correction, step up to a more aggressive pad, then finish with this one.

What backing plate do I need for it?

A hook-and-loop backing plate sized slightly smaller than the pad face. Confirm the pad diameter, then match a plate to your rotary. The Semi-Flex 7" Backing Plate fits this pad.

Information:

Size(s): 7" Pad.
Content(s): 1 Pad.

Speed Recommendations:

Use Recommendations: