Stinger Chemical Floor Scrubber Soap

Mob & Bucket:

1. Wear the proper PPE before using product. Dilute to desired use.
2. Wet the flooring surface to be cleaned.
3. Mob the product onto the surface and let dwell for 1 minute.
4. Scrub the area with a mop, sponge, or brush on heavily soiled areas.
5. After grease and grime has softened, rinse the area and surrounding paint thoroughly with water under high pressure.
6. Squeegee off remaining water and allow the floor to dry.

FOR BEST RESULTS: Always wet down surrounding areas first. Do not allow product to dry on surface.

Floor Scrubbing Machine:

1. Wear proper PPE (gloves, eye protection) before handling. Dilute the soap to desired strength (1:32 to 1:128).
2. Pre-sweep or vacuum the floor to remove loose dirt and debris.
3. Fill the scrubber’s solution tank with diluted Stinger soap.
4. Run the machine over the floor, applying solution evenly. Let dwell for 1-3 minutes on heavy soils.
5. Scrub using appropriate brush/pad pressure—adjust speed for optimal cleaning.
6. Recover dirty solution with the scrubber’s vacuum/squeegee system.
7. Rinse if needed (for sticky residues) with clean water in a separate pass.
8. Allow floor to dry completely before foot traffic.

Stinger Recommended: Dilute Up to 1:128.
SNS Customers Light Duty: 1:10.
SNS Customers Heavy Duty: 1:1.
Using a Mop & Bucket: 6-8 ounces per 5 Gallons.

• Shop Floor Cleaner
• Concrete, Epoxy Tile Cleaner
• Unfinished Wooden Floor Cleaner