{"product_id":"sandia-extractor-hose-hanger","title":"Sandia 12-Gallon Hose Hanger","description":"\u003ch3 style=\"text-align: center;\"\u003eHose Hanger for the 12-Gallon Sniper\u003c\/h3\u003e\n\u003cp\u003eThis is the genuine Sandia hose hanger for the \u003ca href=\"https:\/\/snsautosupply.com\/products\/sniper-carpet-extractor\" title=\"Sniper Extractor\"\u003e12-gallon Sniper carpet extractor\u003c\/a\u003e. It gives the vacuum and solution lines a dedicated place to live on the machine instead of coiled on a shop floor or thrown loose into the back of a van.\u003c\/p\u003e\n\u003cp\u003eThat matters more than it sounds. A \u003ca href=\"https:\/\/snsautosupply.com\/products\/25-extractor-hose-assembly\" title=\"Extractor Hoses\"\u003e25-foot hose assembly\u003c\/a\u003e is a real line item, and hoses almost never fail from wear on the inside. They fail from being kinked, crushed, and stored wet. A hose coiled tight on concrete develops a permanent set, the vacuum line eventually collapses internally under suction, and airflow drops off long before anything looks wrong from the outside. Hanging them in wide loops keeps that from happening and lets recovery water drain out instead of sitting inside the line. Lightweight at 3 lbs, and it travels with the machine, so the hoses go where the unit goes. The rest of the \u003ca href=\"https:\/\/snsautosupply.com\/collections\/sandia-extractors-parts\" title=\"Sandia 12-Gallon Parts\"\u003eSandia 12-gallon parts\u003c\/a\u003e are here.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eWhat Makes it Great:\u003c\/h3\u003e\n\u003cp\u003e🪝 \u003cstrong\u003eProtects an Expensive Hose:\u003c\/strong\u003e Wide, supported loops instead of tight floor coils, which is the difference between a hose that lasts and one that collapses internally.\u003c\/p\u003e\n\u003cp\u003e💧 \u003cstrong\u003eLets Hoses Drain:\u003c\/strong\u003e Hung vertically, recovery water runs out rather than pooling in the low spots of a coiled line.\u003c\/p\u003e\n\u003cp\u003e🚐 \u003cstrong\u003eTravels With the Machine:\u003c\/strong\u003e Hoses stay on the unit through transport instead of ending up loose in the van, dragged, or driven over.\u003c\/p\u003e\n\u003cp\u003e🔩 \u003cstrong\u003eGenuine Sandia Accessory:\u003c\/strong\u003e Made for the Sniper chassis, so it mounts where Sandia intended rather than being fabricated onto the frame.\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does a hose hanger matter on an extractor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause hose failure on these machines is almost always mechanical damage rather than wear. Tight coils on a hard floor put a permanent bend in the line, and anything that gets stepped on, rolled over, or crammed into a vehicle takes a crush that never fully recovers. Giving the hoses a fixed home on the machine removes most of the situations where that damage happens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat causes an extractor hose to lose suction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsually a collapsed or kinked vacuum line, and it is easy to miss because the outside can look fine. Vacuum hose relies on its internal structure to stay open against negative pressure. Once that structure is damaged at a kink point, the hose partially closes under suction and airflow drops even though nothing is visibly wrong. Check for soft spots and permanent bends before you start suspecting the vacuum motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do extractor hoses start to smell?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the recovery line carries dirty water and then gets coiled up and put away still wet. Standing water in the low spots of a coiled hose is exactly the environment bacteria want, and the odor that develops transfers into the next job. Hanging the hoses so they drain and dry between uses is the simplest fix, and it is cheaper than chasing the smell with chemicals afterward.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store extractor hoses between jobs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlush the recovery line, let both hoses drain, and hang them in loops as wide as the space allows. Avoid tight coils, avoid anywhere they can be stepped on, and keep them out of direct sun since UV degrades hose jacket over time. The goal is simple: no sharp bends, no standing water, no weight on top of them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit the 3-gallon Sandia extractor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This hanger is built for the 12-gallon Sniper chassis. The 3-gallon spotter is a different machine with a different frame, so check parts listed for that unit instead.\u003c\/p\u003e","brand":"Sandia Products","offers":[{"title":"Default Title","offer_id":52396023644456,"sku":"SP-HOSEHANGAR","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/3589\/2776\/files\/sandia-hose-hanger.jpg?v=1789667157","url":"https:\/\/snsautosupply.com\/products\/sandia-extractor-hose-hanger","provider":"SNS Auto Supply","version":"1.0","type":"link"}